{{currentPhoto.text}}
<
Musikanlæg Emotiva - earthquake - DIY [Tidl. AV-enhed] 30000
1.805 visninger
|
Oprettet:
Musikanlæg Emotiva - earthquake - DIY
Prisklasse:
30000
Forstærker/reciever:
Emotiva XDA-2.
Main Output Level:
1 VRMS (nominal, unbalanced with full scale digital signal); 2 VRMS (maximum, unbalanced)
2 VRMS (nominal, balanced with full scale digital signal); 4 VRMS (maximum, balanced)
Frequency Response:
20 Hz – 20 kHz +/- 0.1 dB (44/16)
20 Hz – 40 kHz +/- 0.1 dB, -3 dB @ 80 kHz (192/24)
THD+N (all sample rates): < 0.0025%
IMD:
< 0.0025% (44/16)
< 0.0005% (192/24)
S/N Ratio:
> 96 dB (44/16)
> 113 dB (192/24)
Crosstalk:
< 100 dB (44/16)
< 113 dB (192/24)
Headphone Amplifier Output Power:
1.9 VRMS max into 10 Ohms @ < 0.02% THD (360 mW)
2.25 VRMS max into 47 Ohms @ < 0.015% THD (100 mW)
2.25 VRMS max into 100 Ohms @ < 0.01% THD (50 mW)
2.25 VRMS max into 300 Ohms @ < 0.01% THD (16 mW)
2.25 VRMS max into 600 Ohms @ < 0.01% THD (8 mW)
Output Power:
1.9 VRMS max into 10 Ohms @
< 0.02% THD (360 mW)
2.25 VRMS max into 47 Ohms @
< 0.015% THD (100 mW)
2.25 VRMS max into 100 Ohms @
< 0.01% THD (50 mW)
2.25 VRMS max into 300 Ohms @
< 0.01% THD (16 mW)
2.25 VRMS max into 600 Ohms @
< 0.01% THD (8 mW)
Signal to Noise Ratio:
> 105 dB (ref full output)
Size unboxed: 17” W x 2.25” H x 14” D
(not counting feet and connectors)
Weight: 10.5 lbs (unboxed)
Fantastisk lille og simpel forforstærker, med tilhørende fjernbetjening.
Fungere også som headsæt forstærker, virker rigtig fint.
effektblokke fra Emotiva XPA-1L
"the dream made real"
Number of channels: 1
Topology: Fully balanced, fully discrete, Quad Differential, high current, short signal path, with switchable Class A or Class A/B operation.
Power output (all channels driven):
250 watts @ 8 ohm (0.1% THD)
500 watts @ 4 ohm (0.1% THD)
35 watts @ 8 ohm; Class A operation
Note: In Class A mode, under normal conditions, the XPA-1L operates in pure Class A mode at all power levels up to 35 watts, above this level it will automatically transition into Class A/B mode.
Rated Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz + / - 0.15 dB
Minimum Recommended Load Impedance: 4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads).
Frequency Response: 10 Hz to 80 kHz (+ 0 / - 2 dB).
THD + noise: < 0.005%
Signal to Noise Ratio (8 Ohm load): > 90 dB at 1 watt (A-weighted).
> 116 dB at rated power (A-weighted).
Damping Factor (8 Ohm load): >500
Speaker Output Connections: Audiophile grade five-way binding posts, gold plated with clear insulator, 1 pair.
Power Supply: 90,000 uF of storage capacitance.
450 VA heavy duty toroidal transformer
Input Sensitivity (for rated power; 8 Ohm load): 1800 mV.
Gain: 29 dB.
Input Connections: Unbalanced (RCA); balanced (XLR); switchable.
Input Impedance: 50k ohms.
Trigger: Trigger Input: 5 - 20 V (AC or DC); <10 mA input current required.
Trigger Output: 12 VDC; can drive any load up to 100 mA.
Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched).
Front Panel Controls and Indicators: Standby; push button (halo ring changes color to indicate Standby or On).
Status LED; illuminates blue for normal operation, flashes red during power-up or when a fault occurs; (may be disabled by rear panel Status LED switch).
Rear Panel Controls: AC Power switch; rocker controls AC mains power.
Status LED switch; rear switch disbles front panel Status LED.
nput selector; toggle switch selects between balanced and unbalanced inputs.
Protection: The XPA-1L is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.
Dimensions:
unboxed: 17” wide x 3.875” high x 19” deep (includes feet and binding posts).
boxed: 23" wide x 8.75" high x 24 1/2" deep
Weight: 35 lbs (45 lbs boxed)
Virkelig lækre blokke med masser af power, og fuldstændig lækker lyd, spiller så fantastisk.
XJ-300FR til at drive subwoofere i højtalerne.
2 X 110 WRMS (8-Ohm Stereo)
2 x 170 WRMS (4-Ohm Stereo)
170 WRMS @ 110 volt AC (8-Ohm Mono Bridged)
210 WRMS @ 230 volt AC (8-Ohm Mono Bridged)
320 W-IHF (dynamic power) @ 230 volt AC (4-Ohm Mono Bridged)
Wall or rack mountable
Class “J” Stereo Modular design
RCA and USB inputs
Auto Signal Sensing ON / OFF
Compact size
Volume control
Finish: Flat Black
Weight: 1.7 kg
Comes with 4 detachable rack ears + 1 connector bracket (for connecting multiple amplifiers)
OPTIONAL Long Ears extension brackets available
Frequency Response: 20-20kHz
High Pass Filter: 15 HZ
Phase infinitely variable: 0 to 180 degr.
Crossover: 50Hz - 160Hz
Signal To Noise: 101 dB
Load Impedance: 2 Ohms or greater
THD: 0.08%
Damping Factor:> 1400
Power Line Voltage: 110-220 ~ AC50/60Hz
Main Output Level:
1 VRMS (nominal, unbalanced with full scale digital signal); 2 VRMS (maximum, unbalanced)
2 VRMS (nominal, balanced with full scale digital signal); 4 VRMS (maximum, balanced)
Frequency Response:
20 Hz – 20 kHz +/- 0.1 dB (44/16)
20 Hz – 40 kHz +/- 0.1 dB, -3 dB @ 80 kHz (192/24)
THD+N (all sample rates): < 0.0025%
IMD:
< 0.0025% (44/16)
< 0.0005% (192/24)
S/N Ratio:
> 96 dB (44/16)
> 113 dB (192/24)
Crosstalk:
< 100 dB (44/16)
< 113 dB (192/24)
Headphone Amplifier Output Power:
1.9 VRMS max into 10 Ohms @ < 0.02% THD (360 mW)
2.25 VRMS max into 47 Ohms @ < 0.015% THD (100 mW)
2.25 VRMS max into 100 Ohms @ < 0.01% THD (50 mW)
2.25 VRMS max into 300 Ohms @ < 0.01% THD (16 mW)
2.25 VRMS max into 600 Ohms @ < 0.01% THD (8 mW)
Output Power:
1.9 VRMS max into 10 Ohms @
< 0.02% THD (360 mW)
2.25 VRMS max into 47 Ohms @
< 0.015% THD (100 mW)
2.25 VRMS max into 100 Ohms @
< 0.01% THD (50 mW)
2.25 VRMS max into 300 Ohms @
< 0.01% THD (16 mW)
2.25 VRMS max into 600 Ohms @
< 0.01% THD (8 mW)
Signal to Noise Ratio:
> 105 dB (ref full output)
Size unboxed: 17” W x 2.25” H x 14” D
(not counting feet and connectors)
Weight: 10.5 lbs (unboxed)
Fantastisk lille og simpel forforstærker, med tilhørende fjernbetjening.
Fungere også som headsæt forstærker, virker rigtig fint.
effektblokke fra Emotiva XPA-1L
"the dream made real"
Number of channels: 1
Topology: Fully balanced, fully discrete, Quad Differential, high current, short signal path, with switchable Class A or Class A/B operation.
Power output (all channels driven):
250 watts @ 8 ohm (0.1% THD)
500 watts @ 4 ohm (0.1% THD)
35 watts @ 8 ohm; Class A operation
Note: In Class A mode, under normal conditions, the XPA-1L operates in pure Class A mode at all power levels up to 35 watts, above this level it will automatically transition into Class A/B mode.
Rated Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz + / - 0.15 dB
Minimum Recommended Load Impedance: 4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads).
Frequency Response: 10 Hz to 80 kHz (+ 0 / - 2 dB).
THD + noise: < 0.005%
Signal to Noise Ratio (8 Ohm load): > 90 dB at 1 watt (A-weighted).
> 116 dB at rated power (A-weighted).
Damping Factor (8 Ohm load): >500
Speaker Output Connections: Audiophile grade five-way binding posts, gold plated with clear insulator, 1 pair.
Power Supply: 90,000 uF of storage capacitance.
450 VA heavy duty toroidal transformer
Input Sensitivity (for rated power; 8 Ohm load): 1800 mV.
Gain: 29 dB.
Input Connections: Unbalanced (RCA); balanced (XLR); switchable.
Input Impedance: 50k ohms.
Trigger: Trigger Input: 5 - 20 V (AC or DC); <10 mA input current required.
Trigger Output: 12 VDC; can drive any load up to 100 mA.
Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched).
Front Panel Controls and Indicators: Standby; push button (halo ring changes color to indicate Standby or On).
Status LED; illuminates blue for normal operation, flashes red during power-up or when a fault occurs; (may be disabled by rear panel Status LED switch).
Rear Panel Controls: AC Power switch; rocker controls AC mains power.
Status LED switch; rear switch disbles front panel Status LED.
nput selector; toggle switch selects between balanced and unbalanced inputs.
Protection: The XPA-1L is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.
Dimensions:
unboxed: 17” wide x 3.875” high x 19” deep (includes feet and binding posts).
boxed: 23" wide x 8.75" high x 24 1/2" deep
Weight: 35 lbs (45 lbs boxed)
Virkelig lækre blokke med masser af power, og fuldstændig lækker lyd, spiller så fantastisk.
XJ-300FR til at drive subwoofere i højtalerne.
2 X 110 WRMS (8-Ohm Stereo)
2 x 170 WRMS (4-Ohm Stereo)
170 WRMS @ 110 volt AC (8-Ohm Mono Bridged)
210 WRMS @ 230 volt AC (8-Ohm Mono Bridged)
320 W-IHF (dynamic power) @ 230 volt AC (4-Ohm Mono Bridged)
Wall or rack mountable
Class “J” Stereo Modular design
RCA and USB inputs
Auto Signal Sensing ON / OFF
Compact size
Volume control
Finish: Flat Black
Weight: 1.7 kg
Comes with 4 detachable rack ears + 1 connector bracket (for connecting multiple amplifiers)
OPTIONAL Long Ears extension brackets available
Frequency Response: 20-20kHz
High Pass Filter: 15 HZ
Phase infinitely variable: 0 to 180 degr.
Crossover: 50Hz - 160Hz
Signal To Noise: 101 dB
Load Impedance: 2 Ohms or greater
THD: 0.08%
Damping Factor:> 1400
Power Line Voltage: 110-220 ~ AC50/60Hz
Tuner
Bruger IPAD
Cd-afspiller
Emotiva ERC-3
"Taking CDs to the Next Level"
Connectivity:Stereo XLR balanced analog audio outputs: 1 set Stereo unbalanced analog audio outputs: 1 set Digital audio outputs: 1 Coax S/PDIF; 1 Toslink optical S/PDIF; 1 AES/EBU
Formats Supported:Stereo audio CDs, (Red Book standard), prerecorded or computer recorded MP3 audio CDs, prerecorded or computer recorded with stereo audio files Hybrid SACDs with stereo audio CD layer (Red Book standard)
Output Level:Balanced outputs: +12 dBV (4 V RMS; 11 V P-P)
Unbalanced outputs: +6 dBV (2 V RMS; 5.5 V P-P)
Frequency Response:10 Hz - 20 kHz +/- 0.04 dB
S/N Ratio: 94 dB
THD:< 0.002% @ 1 kHz
< 0.015% (20 Hz - 20 kHz)
IMD (SMPTE 4:1):< 0.005%
Crosstalk:< 92 dB @ 1kHz
Phase Deviation:< 0.6 degrees (20 Hz - 20 kHz)
Power Requirements:115/230 VAC +/- 15%
Weight:21 pounds (unboxed)
26 pounds (boxed)
Dimensions:17 “W x 14”D x 4” H (unboxed)
23” W x 18”D x 7” H (boxed)
Virkerlig lækker CD-afspiller, som bare levere en fantastisk lyd.
"Taking CDs to the Next Level"
Connectivity:Stereo XLR balanced analog audio outputs: 1 set Stereo unbalanced analog audio outputs: 1 set Digital audio outputs: 1 Coax S/PDIF; 1 Toslink optical S/PDIF; 1 AES/EBU
Formats Supported:Stereo audio CDs, (Red Book standard), prerecorded or computer recorded MP3 audio CDs, prerecorded or computer recorded with stereo audio files Hybrid SACDs with stereo audio CD layer (Red Book standard)
Output Level:Balanced outputs: +12 dBV (4 V RMS; 11 V P-P)
Unbalanced outputs: +6 dBV (2 V RMS; 5.5 V P-P)
Frequency Response:10 Hz - 20 kHz +/- 0.04 dB
S/N Ratio: 94 dB
THD:< 0.002% @ 1 kHz
< 0.015% (20 Hz - 20 kHz)
IMD (SMPTE 4:1):< 0.005%
Crosstalk:< 92 dB @ 1kHz
Phase Deviation:< 0.6 degrees (20 Hz - 20 kHz)
Power Requirements:115/230 VAC +/- 15%
Weight:21 pounds (unboxed)
26 pounds (boxed)
Dimensions:17 “W x 14”D x 4” H (unboxed)
23” W x 18”D x 7” H (boxed)
Virkerlig lækker CD-afspiller, som bare levere en fantastisk lyd.
Pladespiller
Båndoptager
DVD/Video
Højttalere
DIY højtalere.
Højtalerne består af følgende.
SPH-6M mellemtoner fra monacor.
RBT-20 bånddiskanter fra monacor.
DBXI-10D Subwoofer enhed fra Earthquake.
Slap 10" passiv enhed fra earthquake.
Delefilter lavet af komponenter fra Monacor.
Højtalerne består af følgende.
SPH-6M mellemtoner fra monacor.
RBT-20 bånddiskanter fra monacor.
DBXI-10D Subwoofer enhed fra Earthquake.
Slap 10" passiv enhed fra earthquake.
Delefilter lavet af komponenter fra Monacor.
TV/Projektor
Ekstra udstyr
Der er bygget lys inde i højtalerne, bag på, så der dannes et flot billede op på væggen, det er lavet som et forsøg på at få fokusering på lyden når lyset omkring en er slukket, meget fed effekt, kan klart anbefales.
Bemærkninger
Alt fra emotiva er helt nyt, og modtaget i 2015, fortryder slet ikke mit køb.. er så glad for det! kan klart anbefales!
bedre billeder kommer når der kommer tid og bedre kamera!
bedre billeder kommer når der kommer tid og bedre kamera!
Musikanlæg Emotiva - earthquake - DIY
jun 2012
Følger: 8 Følgere: 7 AV-enheder: 3 Emner: 8 Svar: 114
Jeg synes den er god, lille med mange muligheder, jeg kunne godt have tænkt mig nogle flere indstillinger osv, men ellers er den rigtig god
nov 2007
Følger: 34 Følgere: 34 AV-enheder: 4 Emner: 47 Svar: 770
jun 2012
Følger: 8 Følgere: 7 AV-enheder: 3 Emner: 8 Svar: 114
Ja det er det
nov 2007
Følger: 34 Følgere: 34 AV-enheder: 4 Emner: 47 Svar: 770
Er det ikke XPA-1L'erne du beskriver der
jun 2012
Følger: 8 Følgere: 7 AV-enheder: 3 Emner: 8 Svar: 114
Jeg synes de lyder rigtig godt, de er ret dybe, så kræver jeg investerer i et nyt møbel.
nov 2007
Følger: 34 Følgere: 34 AV-enheder: 4 Emner: 47 Svar: 770
Ej, har nu også brug for en dac helt generelt. Lyden direkte fra min bærbar er ikke helt i top.
jun 2012
Følger: 8 Følgere: 7 AV-enheder: 3 Emner: 8 Svar: 114
Der kommer selvfølgelig nye billeder når jeg lander derhjemme igen.
Patrick du kan se mere til slap på Earthquakesound.dk
Der er flere modeller, masser af tekst og billeder.
maj 2010
Følger: 4 Følgere: 3 AV-enheder: 5 Svar: 89
jul 2007
Følger: 15 Følgere: 11 AV-enheder: 7 Emner: 26 Svar: 68
mar 2013
Følger: 11 Følgere: 15 AV-enheder: 1 Emner: 6 Svar: 129
Har du nogle billeder af dine slap 10"
har aldrig set dem i et setup før er lidt nysgerrig.
mar 2013
Følger: 11 Følgere: 15 AV-enheder: 1 Emner: 6 Svar: 129
nov 2007
Følger: 34 Følgere: 34 AV-enheder: 4 Emner: 47 Svar: 770
Lækkert setup